Additional (PS4 External Hard Drive) Memory, Purchase an External USB hard drive or HDD Case
As an additional memory PS4, you will use an external hard drive with a USB 3.0 connection, which you will connect to the console in one of the free USB ports. There are so many models of discs that are right for you, personally, I suggest you bet on models of at least 1 TB, like the one available on the Amazon link indicated below.
Alternatively, you can reuse old 2.5-inch hard drives (those for notebooks for instance) inside an HDD case, so as to turn it into an external USB drive. The best HDD case model you can buy on Amazon is the following.
List Of Best External Hard Drive For PlayStation
Seagate 7200 Barracuda
A single-plate storage unit weighs only 400 grams and is very compact at the same time – its dimensions are 10.16 × 14.6 × 2 centimeters. I am also pleased with the rather high shock resistance of the component, which at work is 80 G. The noise level of the unit is low and varies between 23-24 dB, so the noise of its operation will not disturb you. The average delay time of the described HDD is 4.16 ms, which is not much.
- low power consumption (5.3 W) in the load;
- Maximum noise level of 24 dB.
WD Caviar Blue WD10EZEX
WD Caviar Blue WD10EZEX 1TB hard drive combines the best practices of Western Digital. Guaranteed long life, reliability in use, high-speed writing and reading – all this is typical for this model. The disk will allow you to store hundreds of hours of music and video, install many applications and games, provide quick access to the stored data.All this is due to the rotational speed of 7200 revolutions per minute and NCQ technology.
- Cupports NCQ;
- Access delay is 3 ms;
- Manufacturer’s warranty for 2 years.
Seagate 5900 SkyHawk
SkyHawk is optimized for use in RAID arrays, and this must be taken into account when making the decision to purchase a drive.
The Seagate 5900 SkyHawk is connected to the motherboard via SATA III, an interface with a fairly high (6 Gb / s) data rate. The capacity of the carrier is 3 terabytes – in the array will occupy an impressive percentage, and for the home system, in general, can become a repository for many years. Data transfer can be carried out with a component of 180 MB / s with maximum speed.
- The maximum bandwidth of 180 MB / s;
- Fast cache (6 Gb / s).
WD Red IntelliPower
The maximum read and write speed with an average delay of 4.2 ms is 150 MB per second. The 3.5-inch form format indicates that the device is designed for monoblock systems. WD Red IntelliPower WD40EFRX 4 Tb with the highest load consumes no more than 4.5 watts.
The device has a standard SATA connection interface of the 3rd generation, which, unlike its predecessors, is characterized by a high degree of bandwidth up to 6 Gbit / s. The noise level of the device depending on the load ranges from 24 to 26 dB.
- 4096 GB of space
- Easily compatible with raid arrays.
- 4-year manufacturer’s warranty.
A 3.5-inch 01ACA050 500 GB hard drive running on a single plate is suitable for use on desktop PCs. The drive spindle makes 7200 revolutions per minute, while the power consumption does not exceed 6.4 W,
Which makes this hard disk energy efficient. A SATA interface is provided for connecting to a computer, providing data transfer at 6 Gbps.
- SATA III interface with additional power
- bolts included
- Manufacturer’s warranty for three years.
Seagate 5900 IronWolf
IronWolf has a capacity of 1 terabyte — enough for unpretentious use of memory. A spindle rotating at a rate of 5900 rpm provides, on the one hand, performance. And on the other – low (from 21 to 23 dB) noise level. When interacting with this drive, data transfer can reach 180 megabytes per second – operations will be performed very quickly.
Understanding the economy of buyers will be pleasantly surprised by the level of energy consumption, which makes up only 3.6 watts of this hard disk. The rest of the HDD system is connected using SATA III.
Seagate BarraCuda Pro
Technology really makes great strides. Not many years ago being able to have a 1 TB hard drive in your PC was almost a dream given the huge amount of data it could hold. Now this goal is nice that passed, and indeed, expectations have increased tenfold. Yes, because the famous storage device manufacturer Seagate has launched a spectacular new hard drive, which has a beauty capacity of 10 TB.
In reality, the first 10 TB hard drive had already been announced long ago but was released for business only. This Seagate model is the first hard drive ever to be launched for a consumer audience. Of course, many will find it useless to have so much space on a hard disk since 1 TB is often not fully used. But for those who download a lot, it could be a real gem.
The new Seagate hard disk, called BarraCuda Pro, in terms of features, makes 7200 rpm. It is 3.5 inches and is a SATA. Its international list price is $ 535. More convenient than buying two 5 TB hard drives each, since they cost $ 380.
Toshiba 1TB Internal 3.5 Hard Drive SATA
Increasing the memory capacity the new 3.5-inch Toshiba Had Disk series reaches the 4 and 5 TeraByte versions, offering very high performance.
Toshiba launches the MD series, a new range of internal hard drives, offering up to 5 TB¹ of storage capacity. The 3.5-inch drives with a SATA interface not only offer high speed but provide more power and operate silently, Models PX3009E-1HP0 (4 TB) and PX3010E-1HQ0 (5 TB).
Storage Capacity – External Hard Disk
The new internal 3.5-inch MD SATA series hard drives add up to 5 TB of internal storage, allowing you to store more documents, images and data on your PC. Both models, in the 4 TB and 5 TB versions, are suitable for particularly demanding users. Thanks to a rotation speed of 7200 rpm, a 128 MB memory buffer and the Native Command Queuing are able to speed up the computer work of private and professional users. All these features guarantee a greater number of load-and-save cycles, lower latency and optimize queuing storage commands on-the-fly. The MD series has 6.0 Gb / s of interface speed.
high speed, the power supply components keep energy consumption and heat accumulation to a minimum. This new series integrates the most innovative Toshiba technology, including an intelligent ramp-loading system and an integrated shock sensor to protect the user’s critical data.
- 4 TB: PX3009E-1HP0
- 5 TB: PX3010E-1HQ0
- Interface: SATA
- SATA interface speed: ~ 6.0 Gb / s
- Native Command Queuing (NCQ): supported
- Speed: 7200 rpm
- Cache Buffer: 128 MB
- Measurements: 147 (L) x 102 (W) x 26 (H) mm
- Weight approx. 720 g
- Hard Drive – 3.5 inch MD SATA series 3
- Quick installation guide
When you purchasing a hard disk, pay attention to
Spindle speed:- Optimally chooses at the level of 5400-5900 revolutions per minute.
Bandwidth:– According to the manufacturer, the controllers are standard, but, depending on the speed of rotation, the maximum disk access rate is one hundred fifty megabytes per second. You should take a disk with a working speed of 100 MB / sec.
The volume of the drive:- In modern conditions, it is recommended to take from a terabyte due to the fact that modern games weigh decently, and films in blur quality – even more.
Power usage:- Secondary parameter, we recommend purchasing an energy-efficient device with a consumption of up to five watts.
Guaranteed work time and warranty in general:- Regarding the first – most manufacturers promise from one hundred thousand hours of uninterrupted work. And shops usually give two or three years’ warranty.
PS4 External Hard Drive
The PS4 allows you to save games on the external hard drive from the firmware update. You can even connect an external HDD to the PS4 and use it to store all your movies and TV shows. You can copy videos from the PS4 to your hard drive, so you can save all your gameplay movies without worrying about filling the console’s memory. Since the PS4 supports USB 3.0, if you use an external hard drive with USB 3.0, obviously the data transfer is much faster. But it is also compatible with older HDDs.
In order to install PS4 games on an external hard drive, the disk must be of USB 3.0 type and at least 250GB of capacity. It must also be formatted in the FAT32 format (in the second paragraph it explains how to do it).
Once these requirements are met, it is now sufficient to connect the hard disk to the PS4 and go to Settings -> Devices -> USB storage devices.
Finally, you have to select your hard disk and click on Format as extended storage memory. From now on you can use the external hard drive to install PS4 games.
Have you installed so many games on your PS4‘s hard drive and now you have no more space to install new ones? If you do not want to give up any game you can change the internal hard drive to a bigger one, but in this case, you would still lose the games already installed on the original PS4 disk, not to mention the difficulties in having to open the console. But from today you can get additional PS4 memory without having to take a screwdriver! I will show you how to use the “ extended storage memory ” feature to increase the internal memory of the PS4 to be used for games.
- To take advantage of this feature, make sure your PS4 (normal, Slim or Pro) is updated with the latest firmware.
- If your PS4 doesn’t have enough HDD space to install a game, you can use an Extended Storage Device to add more storage.
- You can download games and add-ons from PlayStation℠Store directly to the extended storage and move games from your PlayStation4 system’s storage to your HDD.
- When you format a storage device for use as extended storage, you can use it to install your applications. You can also move applications from PS4 ™ system storage to extended storage.
The PS4 system must have the latest system software version or later.
What are the requirements for PS4 external hard drive?
- USB 3.0 or later
- 250 GB minimum, 8 TB maximum capacity
Proper operation is not guaranteed for all external hard disc drive models.
You will see the much ability to download your games and application on external HDD storage, it is easy to set up and it is easy to use the external HDD with ps4
Minimum HDD specification
- USB 3.0 or later
- 250 GB minimum, 8 TB maximum capacity
What is the format of the PS4 external hard drive?
Turn on the console and connect the HDD disk or case to the first free USB port on your PS4; the system will automatically recognize the new disk, asking you to format it as extended storage memory. Click on the button Format as an extended storage memory to confirm the operation.
The operation will delete any file or folder saved on the hard disk, make sure the disk does not contain important data!
Once the installation is complete, the operating system will use the new disk as an installation path for all new games, thus avoiding filling the space of the internal hard disk. This setting is automatically adjusted, but if you want to change the installation location of the games you just need to reach the menu at the following location:
- Go to Settings > Devices > USB Storage Devices
- Select the USB storage device to format and choose [Format as Extended Storage].
You will have a question? That how you that your ps4 have to do format. So, you will see many numbers of warnings that will format your ps4 will remove and install the previous data, so make sure you click on ok and that nothing will be stored on your device that you don’t lose any data.
How to change the Install Location of PlayStation?
- Select Settings> Storage, and then press the OPTIONS button.
- Select [Application Install Location] > [Extended Storage].
How to Move Applications In PlayStation ?
If you have games already installed that you want to move to the additional PS4 memory just installed, simply open the menu indicated by the following
- Click on Settings and then select on Storage.
- Select the storage where the application you want to move is located, and then select [Applications].
- Press the OPTIONS button and select [Move to Extended Storage] -or- [Move to System Storage].
- Add ticks to the applications you wish to move and select [Move].
Settings> Storage memory -> Select the internal disk -> Applications -> select the game to move -> OPTIONS button -> Move to extended storage memory
How Removing your external HDD device in PlayStation?
So, don’t remove the USB storage device when your ps4 is on . you will get more problems to your ps4 and external, make sure you disconnect and then remove the USB storage device.
Click on Sound/Devices > Stop Using Extended Storage on the quick menu.
After you Select the extended storage device to disconnect in the Settings > Devices > USB Storage Devices, and then select [Stop Using This Extended Storage].
How to Disconnect additional PS4 memory?
Do you no longer want to use the external hard drive as an additional PS4 memory? Don’t simply disconnect it, you risk damaging your saved games. Follow the procedure below:
- Open Audio / Devices menu -> Stop using extended storage memory
- Open Settings -> Devices -> USB storage devices -> select external disk -> Stop using this extended storage memory
PS4 External Hard Drive Not Recognized ?
Please check that the USB storage device (USB stick, external hard drive) you are using to update the PS4 is formatted to FAT32 or exFAT.
- Insert USB flash to your computer
- Right-click in the assigned drive od USB flash drive
- Then select the format
- Just change the file system type to FAT322
- See the image below
- And click on start
How to Download and Update the firmware of Ps4?
Update the Playstation software with the USB drive
Prepare your USB driver. For this, you need to click your USB drive from your computer and create a new folder called PS4. Then enter the PS4 folder and create a new folder called “UPDATE.” ps4 update file
Go This Website Click Me,
lick On “Agree And Download“……!
Now, Download the update file. After downloading the PS4 software update file, place it in the UPDATE folder. This filename should be “PS4UPDATE.PUP“.
Then, Turn off your PS4 completely. Make sure the power indicator is OFF.
If the power indicator is orange, hold down the Power Console button for at least 5-7 seconds to make sure that the PS4 is entirely out of reach. ps4 update file
Connect the USB to the console and enter Safe Mode. After turning off the console entirely, connect the USB driver to the console and launch your PS4 in safe mode.
Install the PS4 software update. Select the “Initialize PS4” option and follow the prompts on the screen to complete the installation process.
I fixed it myself by this method, please be careful because it will be a waste of money if you do not understand everything.
As a result of investigating the cause, it is for those who find that there is a problem with the hard disk.
- First of all, it is the division where there is a cause.
- Motherboard or Blu-ray drive or HDD or other parts
- First, I tried to download a suitable game from the PS store.
- Then the game works without problems.
- At this point, it turns out that the body is alive.
- Well, it’s a replacement.
If you get a CE-30005-8 error, you need to find out what is wrong with the Blu-ray Disc drive or the hard disk drive.
If you think it seems a bit impossible, let’s get in touch with the support
Hard disk corruption is most often caused by a loss of power while reading or writing to the hard disk, for example, due to a power failure or a power failure. Not turning off the power in the correct way is the cause of breaking with a very high probability. Also, strong magnets near the hard disk can cause it to break.
its HHD problem only upgrades from 500GB 5400rpm hard drive to 1TB 7200rpm hard drive.
How to Download and Update Ps4
Get a flash drive separate from the drive and then you will update it and you need two.
then go to your ps4 and plug into the flash drive, once you have a plugin your flash drive go to the settings on your ps4 and click on application saved data management then press X on the saved data in system storage, then copy to your USB storage device, and now you go to each game and then select the data to the flash drive, when you replace the hard drive then you have saved all your games in flash drive. Once you replace the hard drive just go back to the application saved data management settings then select ” saved data on USB storage device” when you plug in the USB storage device and go to the process of copying all you have saved in the drive.