PS4 Port Forwarding – Have Look To Table Of Content
PS4 Port Forwarding, many Internet providers, the network is set up in such a way that it does not take into account the needs of online games.
In practice, this means that the ports that are needed for the game are simply blocked. The problem is typical for both consoles and computers.
Ports are connection gateways; they are used by services to establish good communication between the PC and the game server. Almost all services often encounter the fact that the ports necessary for operation are blocked.
This manifests itself in the form of inability to connect to friends, difficulties in connecting with the lobby, frequent network breaks, high ping, etc
it is possible to manually configure port forwarding. To do this, you need to use a Wi-Fi router or a modem with a router function. To switch ports for Apex Legends,
Open a web browser (you can use any) and go to the settings page of the router. IP addresses 192.168.0.1 and 192.168.1.1 are often used. To accurately determine the desired address, you must flip the router and read the address on the bottom panel of the device.
Immediately after entering the address into the browser, you need to enter a login with a password, which is the default admin.
Go to the “Port Forwarding” page if the English interface is Port F The required section is often located in the LAN connection settings. Set forwarding of the necessary ports. Each platform uses different ports.
The computer version of the game uses: TCP: 1024-1124, 3216, 9960-9969, 18000, 18060, 18120, 27900, 28910, 29900;
UDP: 1024-1124, 18000, 29900, 37000-40000.
Apex Legends for PlayStation 4 works with ports: TCP: 1024-1124, 1935, 3216, 3478-3480, 9960-9969, 18000, 18060, 18120, 27900, 28910, 29900;
UDP: 1024-1124, 3074, 3478-3479, 18000, 29900, 37000-40000.
Ports to play on Xbox One: TCP: 1024-1124, 3074, 3216, 9960-9969, 18000, 18060, 18120, 27900, 28910, 29900;
UDP: 88, 500, 1024-1124, 3074, 3544, 4500, 18000, 29900, 37000-40000.
There are still malfunctions related to configuring a firewall that blocks access to individual ports. In order not to look for problematic ports, it is better to enter the appropriate numbers according to the platform and save them in the settings of the router. It may be necessary to restart the router. If done correctly, Apex Legends will start working much better.
Using A DNS Server
DNS servers play an important role in connecting to Apex Legends. After installing the game DNS server should improve the stability of the connection. For each region, the best DNS may differ, you have to experiment a little.
A high-quality and reliable DNS server for ps4 is simply necessary for a comfortable game over the network. Otherwise, any online games will be subject to lags and freezes. especially since in most fps, action and RPG games – hangs can change the outcome of the battle. We have collected here only the best gaming DNS servers that support PS4, Xbox One, Nintendo Switch. fast DNS provider
DNS stands for Domain Name System there is no need to delve into the technical specification, but in short, it is a system for converting a domain name into an IP address.
After entering the site address, the DNS server determines its IP and directs traffic to the right place. All services have their own unique IP address and port.
In case of delay in recognizing the desired IP address, lags occur. In practice, this means the appearance of many problems with games and surfing. fast DNS provider
But after installing a good game DNS-addresses, the situation is greatly improved. Google DNS servers
High-quality DNS servers
- Increase the speed of loading web pages
- Increase surfing security and built-in phishing protection
- The ability to use parental controls
- Nearby DNS servers improve network speed
- Improving the reliability of the connection
- Reduced ping and reduced packet loss.
Setting up a good DNS server in PS4 does a lot to improve the user’s gaming experience. Usually, you have to pay for other services with so many positive aspects, but the DNS servers from the list are free.
There is not a single reason not to switch to the game server and the faster this is done, the sooner it will be possible to get the most positive impressions about online games. fast DNS provider
Static DNS IP for PS4
The static IP address to the PlayStation 4 in order to establish a NAT Type 2 connection. Setting a permanent IP address ensures that your console will always have the same internal IP, even after rebooting the console.
Some routers allow you to manually assign an IP address, so first, you need to check if this option is possible on your router. If not, then you can configure a static IP through the PS4 console menu.
Manually configure a static IP address on the PlayStation 4
Find in your router the path to manually configure the IP-address. Not all routers support this feature. The configuration process will differ depending on the router model you are using.
If your modem allows you to manually configure the IP address, then simply assign a permanent IP to the PlayStation 4. you will not have to make any changes in the settings of the console. The router will independently assign an internal IP for the PS4
your router does not support manual IP configuration, you will have to do the settings through the PS4 console.
You can try to permanently bind the PS4 to the IP address that you use now. To find this IP, enable PS4
- In the PS4 main menu, select Settings.
- Go to the Network
- Then click on Choose View Connection Status
- Then you can see the current IP address.
And now note down the IP address which is showing on your ps4 screen, you will need to remember the IP address of your router, which is specified as the default gateway.
go to the settings of the router (this is done via a browser by entering the IP of the router, for example, 192.168.1.1. Or 192.168.1.0. / 192.168.0.1). You will need to permanently assign the PS4 IP address that you wrote down earlier in the first step.
In some routers, you cannot assign IP addresses that are in the DHCP range of a router (a range of addresses that is automatically assigned by the router to various devices on your network). If this is your case, then you will need to select an IP address outside the range of the DHCP router.
how to change nat type ps4
How to set up a static IP address in PS 4
- Select “Settings” in the main menu.
- Select “Network”
- Click on “Test Internet Connection”. Wait for the connection check.
If you successfully pass the connection test, you will see the inscription “Internet Connection Successful”. Opening ports (opening ports) or Port Forwarding in your router means redirecting all traffic to a specific internal IP address. To get a NAT Type 2 connection, you need to route the following ports to the
PS4 IP address TCP: 80, 443, 1935, 3478-3480
UDP: 3478-3479
Open Ports on Your Router port forward
In this site, you can find ports for your router
After you have assigned a fixed IP address for the PS4 and redirected the ports in the router, check the Internet connection. how to change nat type ps4
And now your connection should be set to NAT Type 2.
If it didn’t connect to NAT Type 2, make sure you check it again and read perfectly.
Configure A Static IP Address In PS4
Find out which IP address, subnet mask, gateway and DNS are currently using PS4.
- Go to the ps4 main menu and click on settings
- Click on the “Network”
- Then at the bottom, you can see “View Connection Status” click on that
- Record the IP address, subnet mask, gateway, primary and secondary DNS (Primary DNS and secondary DNS). You will need to enter all these numbers into the console a little later.
- Next, enter the router settings via PC.
You need through the settings to see the range of DHCP addresses that the modem uses to automatically assign IP devices on the network.
Then click on this site setup router select your router to follow the steps given the
To know more information click here to know Setup a Static IP Address on the PS4
The range should You need to choose a number between 2 and 254, which is outside the DHCP range to assign an IP to your STB.
- the number 31, then the full IP address for PS4 will look like this: 192.168.1.201
- If the DHCP range is 200-254,
- you can select numbers from 2 to 50 If the router uses a range of 50-200,
- then from 2 to 49 To check if your chosen IP can be used,
- Through the Start menu,
- open Run Type the cmd command without quotes and press Enter
- After that, a black window should appear.
- Then type the IP address you want to check. Then click Enter.
How To Set The IP Address Of PS4?
you need PS4 to set the IP address
- In the main menu, select “Settings”
- Next – Network
- Set Up Internet Connection
- Select a Wi-Fi or LAN connection, depending on how the console is connected to the Internet.
- On the screen, select “Custom”
- On the “IP Address Setting”, select “Manual” (Manual)
- Choose an IP Address
- Enter the IP you chose earlier and click “Done”
Enter the digits from the list by the number you wrote down when executing the first paragraph of this guide. Click Finish to confirm the changes.
Click on “Default Gateway” and enter the IP address of your router. Confirm the changes. Select “Primary DNS” (Primary DNS), enter the number you wrote down earlier in item Confirm.
- Click on “Secondary DNS”, also write down the number you previously recorded. Click “Finish”. Click on Next
- On the MTU Settings select “Automatic”
- On the proxy server settings, select “Do Not Use”.
- Next, click Test Internet Connection. Wait until the end of the check.
then the static IP will be configured correctly. If there are any problems, check that the information entered is correct, in particular, check the numbers that you entered in the line of the IP address, gateway, DNS.
- To double-check this, open the main PS4 menu, select Settings => Network => View Network Status
Opening ports or Port Forwarding in your router means redirecting all traffic to a specific internal IP address.
- TCP: 80, 443, 1935, 3478-3480
- UDP: 3478-3479
After that you have assigned a static IP address for the PlayStation 4 and correctly redirected the ports of your router, you can check the Internet connection
What is the IP addresses?
IP addresses are four groups of numbers separated by dots that allow computers and network devices to identify each other. Each computer must have at least one IP address, and for two different devices, this address cannot be absolutely identical. If it still happens, none of them will be able to access the Internet.
Under the link given below, you can find a lot more detailed information on this issue. All of it is hardly useful to you, but you can more accurately understand how any local or global network works.
Go to 192.168.0.1 with the help of login and password
The router is a device designed to work on a network. It has its own operating system, which is based on Unix. It is configured using a special web interface – Telnet (personal account). In order to get into the settings of the router, you just need to register this address in the address bar of your browser. Login and password from your router should be on the back of his box. If you cannot enter your settings, it will be better to check how your network adapter is using the IP.
Enter 192.168.0.1
Press the key combination Win + R and record control net connections in the opened window. Next, we find your network connection and click on it with the right mouse button.
- Go to Properties and select the Internet Protocol Version 4 (TCP / IPv4) tab.
- Then put a tick in front of the automatic obtaining IP address and DNS server.
Browser properties
- Go to “ Windows Control Panel ” and go to “ Browser Properties ”.
- Next, go to the “ Connections ” tab and click on the “ Network Settings ” button.
- In the settings, check the box “ Use a proxy server for local connections ”.
Windows Firewall
- Go to Control Panel and select Firewall.
- Click the “ Enable or Disable Windows Firewall ” tab In the window that opens,
- check the box next to “ Disable Windows Firewall it’s you wish to select but not recommended
PS4 and Xbox Port Details
TCP |
UDP | |
| PS3 / PS4 Ports | 80 | |
| 443 | ||
| 983 | ||
| 3658 | ||
| 5223 | ||
| 9293 | 2053 | |
| 3478-3480 | 3478-34780 | |
| 6000-7000 | 6000-7000 | |
| 10050-10051 | 10070 | |
| 10070-10080 | 50000-60000 | |
| Xbox One / Xbox 360 Ports | 53 | 53 |
| 80 | 88 | |
| 3074 | 3074 | |
| 7500-17899 | 500 | |
| 30000-40399 | 1001 | |
| 1200 | ||
| 3544 | ||
| 4500 |
What are the port numbers for ps4?
Port Forwarding in your router means redirecting all traffic to a specific internal IP address. To get a NAT Type 2 connection, you need to route the following ports to the
PS4 IP address TCP: 80, 443, 1935, 3478-3480
UDP: 3478-3479
What is port forwarding?
For many Internet providers, the network is set up in such a way that it does not take into account the needs of online games.
In practice, this means that the ports that are needed for the game are simply blocked. The problem is typical for both consoles and computers.
Ports are connection gateways; they are used by services to establish good communication between the PC and the game server. Almost all services often encounter the fact that the ports necessary for operation are blocked.
This manifests itself in the form of inability to connect to friends, difficulties in connecting with the lobby, frequent network breaks, high ping, etc
Do ports use PSN?
TCP: 80, 443, 1935, 3478-3480
UDP: 3478-3479