Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

Solved: CE-36244-9 Error ,Very Easily and Speedy

Fixed CE-36244-9 Error of Playstaion 4

PS4 CE-36244-9 Error Sony console can see this code during the downloads of games, add-ons, patches, various programs and other diverse digital content. But the error code is not the only thing that users get.

Considering that physical carriers are used less and less, solving the error CE-36244-9 on PS4 is a crucial task. And even if you use disks, what about patches, add-ons and network functionality provided by a huge number of games solving a problem is simply necessary, and we will show you how to do it, and in the shortest possible time.

Method 1 Restarting the PS4

fix the error in restarting the PS4 and the boot process, setting Google’s public DNS, performing the initialization process. We will consider all three ways in this article. Let’s start with the simplest of them, which often solves the error CE-36244-9 on PS4.

Method 2 Restart PS4 and boot process

  • Restart PS4 and boot process Perhaps the error CE-36244-9 is a typical, random crash that occurred in the PS4 software.
  • Now we will try to solve the problem with the help of the simplest actions: restarting the PS4 and the boot process
  • So, restart the console (here, we hope, no problems will arise), then go to “Notifications → Downloads from the network”, cancel the download and repeat it again.
  • you can get rid of the error CE-36244-9 on PS4. Simply put, we restart the console, reset the download of anything and try it once. Simple but effective.

Method 3 DNS From Google

For Speedy DNS Check Fastest DNS servers of ps4

the error CE-36244-9 on PS4, you can use the setting of the DNS-addresses from Google. At least so says a huge number of users on the network. Setting the DNS addresses you need is quite simple during the network connection setup process.

  • So, go to the “Settings” console and select the “Set up an Internet connection.” Next, select the type of connection you need, i.e. wired or wireless.
  • Then you need to select “Special”. The process of setting up the settings for the network connection will begin to select the automatic parameters until you reach the DNS point.
  • Reaching the DNS settings, select “Manual”. We got to the right place: set the address for the primary DNS is 8.8.8.8., And for the additional one – 8.8.4.4.
  • Then finish setting up the network connection, after which the console will check this connection.
  • When finished with the dough, try downloading something to check for the error CE-36244-9 on PS4.

Method 4 PS4 Initialization Process

  • Initialization is a reset of all console settings to default values. The settings displayed on the PS4 could have caused the error CE-36244-9.
  • Open Settings. Go down to the bottom of the settings and find the section “Initialization”. Next, select the item “Initialize PlayStation 4.
  • Select the “Quick” option. Wait until the initialization process is complete, and then try downloading something to check for error CE-36244-9 on PS4.

Do Comment Down If you are still having any Problem or simply contact us, Share it to your friends If they are in need of the DNS details!

Thanks For Your Valuable Time

Have a beautiful day..!

Categories
EXPRESS DNS OF PS4 PS4 DNS ERROR SOLVED Ps4 Error Solved

PS4 Internet Connection Failed is Solved Here :

ps4 internet connection failed

Trying once again to connect your PS4 to a wireless Wi-Fi network, you may stumble upon a ps4 internet connection failed

The message of which will state that it is impossible to connect to Wi-Fi due to the possibly incorrectly entered WPA password for the network.

It is worth mentioning that this error is also able to appear on the PS4 consoles,

Which are first connected to Wi-Fi? Is there a specific reason for this error? Unfortunately, there is none, but in discussions on the ps4 internet connection failed ps4 internet connection failed

Two possible reasons most often come up: problems with the PS4 software and problems with the user’s router.

check the official site of PlayStation

Disconnect all other devices from wifi

The following method was advised by Sony itself on the official website about the appearance of the error NW-31201-7 Try disconnecting other devices from the Wi-Fi network that are already connected to it.

The idea is that your wireless network is under heavy load from other devices,
and the PS4 cannot join because of this. Disconnect a couple of tools from the system, and then try connecting the PS4 to Wi-Fi again.

If the error NW-31201-7 occurred due to network overload, then the problem should have been resolved. If not, move on.

Can not connect to the Wi-Fi network because the Wi-Fi password is not set correctly on the PS4, or the wireless network is busy. ps4 internet connection failed

Go to [Settings]> [Network]> [Internet Connection Setup] to configure the network settings again.

  • Type the IP address of your wireless router (often 192.168.1.1) in your web browser and entering the username and password.
  • In some cases, depending on the routers you need to reduce your speed up from 600 MBPS to 54 MBPS only and enter the wireless settings for that.
  • For other users, they would have been successful after disabling the wireless password on their router or transferring the WPA2 security to something else. But it is not advisable to compromise your wireless security.
  • If all else fails, the ultimate and more radical solution is to connect your PlayStation 4 physically via a network cable.

Method 2

Your IP is manual, Change to automatic, Try It.

  • [Settings] > [Network] > [Test Internet Connection] (LAN or Wi-Fi) to confirm you can connect to the internet.
  • Go to IP address Settings > Select Manual
  • And just change or set 8.8.8 as your primary DNS and 8.8.4.4 as your secondary DNS.

We Have an Article on how to get the latest version of PS4, Ps4 Update Download

  1. CE-33991-5 PS4 Error Code is a problem connecting in your local network or in the game server are unavailable. Check the psn status and check that all the services are working. If there is an issue, it simply follows the steps or contacts sony fix your problem.
  2. Rebook your network and disconnect your router and disconnect your console as while. remove all the cables and wait for 10 mins before connecting the power
  3. Change the DNS, reset the router, put fixed IP, automatic again, retry the connection as it puts on the internet.

Super-Fast DNS Servers For Ps4

DNS Servers On The Console

You should already know how to do? If you don’t; Please continue reading I think there is nothing complicated in this, but it is necessary that settings are in the tabs network. fast dns server 2019

It is important to understand that there is no completely perfect server in which everything would be smooth. All DNS servers have certain pros and cons, so only the user can make the choice of the optimal server. Sometimes you have to try everything, empirically determining the best settings. fast dns provider

The direction of DNS servers is also different. Some, of them, take the main goal – the maximum increase in speed. At the same time, other servers have a bias towards improving user security. Naturally, security systems slightly reduce performance.

fast dns provider and fast dns server 2019

DNS Provider Primary DNS Server Secondary DNS Server
Google 8.8.8.8 8.8.4.4
Verisign 64.6.64.6 64.6.65.6
OpenNIC 23.94.60.240 128.52.130.209
DNS Advantage 156.154.70.1 156.154.71.1
German Privacy Foundation e.V. 87.118.100.175 Deutschland
SafeDNS 195.46.39.39 195.46.39.40
OpenDNS Home 208.67.220.220 208.67.222.222
Comodo Secure DNS 8.26.56.26 8.20.247.20
Dyn 216.146.35.35 216.146.36.36
private 83.243.5.253 Deutschland
FreeDNS 37.235.1.174 37.235.1.177
Yandex.DNS 77.88.8.8 77.88.8.1
DNS.WATCH 82.200.69.80 84.200.70.40
Christoph Hochstätter 209.59.210.167 USA
Norton ConnectSafe 199.85.126.10 199.85.127.10
UncensoredDNS 91.239.100.100 89.233.43.71
Alternate DNS 198.101.242.72 23.253.163.53
puntCAT 109.69.8.51
FoeBuD e.V. 85.214.73.63 Deutschland
SmartViper 208.76.50.50 208.76.51.51
Level3 209.244.0.3 209.244.0.4
GreenTeamDNS 81.218.119.11 209.88.198.133
Hurricane Electric 74.82.42.42
JSC Marketing 216.129.251.13 USA

The most popular DNS server in the world, Almost half of Internet users use servers of this developer. Mostly servers from Google really increase the speed and quality of Internet on consoles. Another positive side is an easily remembered IP address. fast dns akamai

  • Primary DNS: 8.8.8.8
  • Secondary DNS: 8.8.4.4

Use cloud computing and is managed by Cisco. High technology makes the server one of the most effective. This product perfectly combines safety and speed. fast dns akamai

  • Primary DNS: 208.67.222.222
  • Secondary DNS: 208.67.220.220

It is the fastest DNS server and is in great demand in the world. In speed, it surpasses even the DNS from Google. The company also has an excellent IP address Cloudflare provides CDN for millions of sites, access to which is even faster.

  • Primary DNS: 1.1.1.1
  • Secondary DNS: 1.0.0.1
Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

Fixed – Ps4 CE-34878-0 Error Code

Ps4 CE-34878-0 Error Code Is Solved Here!

Ps4 CE-34878-0 Error code on PS4 has long been tormented by many players. It is possible to see this error during an attempt to launch a game or directly during the game process itself. Based on this, it turns out that after the appearance of this problem, the PS4 owner cannot use his console for its intended purpose – to launch games.

The CE-34878-0 error is an extremely inconvenient problem for the user since there are many reasons for its occurrence.

Solution

Error CE-34878-0 on PS4 may occur due to the fact that the system software of your console is not updated to the proper version. You can try to solve this error using a simple software update process on PS4.

Update the software or, more simply, the firmware for the PS4 console is elementary if it is connected to the Internet.
Let’s assume that it is still connected, which is true for most users. First, you need to go to PS4 Settings. Once this is done, select the section called “System Software Update”.

The process of installing new software for PS4 is absolutely automatic and, as already mentioned, requires only a network connection.

After installing the update for the console, try again to start the game where the error CE-34878-0 occurred.
If it started up normally and the error is no longer visible for a long time, then congratulations, since the problem really was just the firmware version.

Update the game

The next possible cause of the CE-34878-0 error is the lack of the required update for the game. Try to check if there is any new update for the game you are launching.

It so happens that it could, for some reason, not be established automatically upon its exit. Checking the availability of an update for a game is quite simple to go back to the main screen of your PS4, select the game with which you have the CE-34878-0 error, click on the “Options” button located on your controller, and select Check for updates.

After selecting this option, the check for the availability of available updates will begin. If any patches or add-ons really came out for your game, they will be automatically downloaded, but only if your PS4 is connected to the Internet.

After installing the update, try running the game to check for CE-34878-0 error.

Decision number 4 Return of the original HDD

Another reason for the CE-34878-0 error on PS4 is the replacement of the original hard disk in the console. If you encounter this error and previously replaced the hard disk, then try to return the old HDD back to the console. This situation occurs quite rarely among users, but its appearance is still possible.

Restoring Default Settings

Perhaps the error CE-34878-0 arises because of some settings you previously set up on the console, which led to the appearance of a problem.

Restore factory settings is quite simple to open the PS4 Settings, select the “Initialization” section, and then select the “Restore Defaults” option.

Next, you need to follow the instructions on the screen and you will restore the default settings. As soon as this process is completed, try running the games you need again and see if the error CE-34878-0 appears on the PS4 this time.

Restart your console:

Turn off your console and then turn it back on.
Make sure your game software is up to date:

Go to the PlayStation home screen.

Highlight the game you’re playing and press the Options button on your controller.

Select “Check For Update” and introduce any updates that are accessible.

Ensure your PS4’s framework programming has the latest update:

Select Settings at the highest point of the PlayStation home screen.

Pick “Framework Software Update” and permit any framework updates to introduce.

Reboot your PlayStation 4

Reinstall the first hard drive:

This is just on the off chance that you have overhauled your PS4’s hard drive (read: supplanted it with a bigger one). Sony proposes re-introducing the first hard drive that accompanied the support.

Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

Oops NP-32091-5 Error? Cannot sync trophies?

NP-32091-5 Error Of Ps4 Is solved In 120 seconds here

When we use ps4 there are different types of problem we have suffer in many of the cases, we Cannot sync trophies, NP-32091-5 error is the topic for which today we will talk about the error NP-32091-5, which can take them away from the player. This error prevents the PS4 account from being correctly synchronized with the PSN service account. However, it is worth noting that NP-32091-5 error does not always manifest itself during manual synchronization of achievements.

  • Some Sony problems could not be fixed. It will be hard to believe, but the cause of the NP-32091-5 error has not yet been found.

If You Have More Achievements

Some users claim that the error NP-32091-5 can sometimes be a simple bug that disappears after you knock out a couple more achievements.

Try adding a couple more trophies to your trophy collection, and then sync with PSN again. In some cases, NP-32091-5 error will disappear by itself.

Console Database Upgrade

If you are convinced that NP-32091-5 error is not a single failure when synchronizing achievements, then let’s try to perform a more complex procedure,

  • which is called “Database Reconstruction”.

No, you don’t need to worry about your personal data. First, you need to completely disable the console.

Then hold down the power button and hold it until two beeps follow each other.

On everything about everything, you should take about seven seconds. By completing these steps, you have entered Safe Mode.

Once you have done this, take the controller from the PS4 and connect it to the console via USB, since wireless technologies do not work in Safe Mode.

  • Before you will be a list of various options: select “Database Reconstruction.”

Start a negotiated process, the completion of which you will need to wait. Having completed the reconstruction of the PS4 database, try again to synchronize the achievements with PSN and verify that the error NP-32091-5 has been fixed.

  • If it still appears, then let’s move on to the last method.

Create a new Ps4 account

There is another way to fix the error NP-32091-5, which is to re-create an account for your PS4 console. Unfortunately, this is not so easy to implement, but we will now explain how to re-create the counting.

  • Create a backup of saving your games to the PS + cloud service or to a USB flash drive.

First, you need to create a guest profile. Do not connect it to your PSN account!

  • Then log in to the PS4 system under this guest account and go through “Settings → Initialization → Delete Master Account”.

If you got rid of your main account on PS4, which, accordingly, led to the deletion of all saved game data, which includes achievements that did not pass synchronization.

Create your primary account again and connect it to the account in the PSN service. Try synchronizing the achievements again and you will see that the NP-32091-5 error is no longer present.

Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

Solved: E-801809A8 ps4 Error

Solved: E-801809A8 PS4 Error

E-801809A8 PS4 Error Currently, owners of Sony PlayStation 4 consoles literally around the world have started complaining about the E-801809A8 error that occurred during their attempt to update the console firmware to version 6.51.

Also Works for any version of PlayStation,

This version should have contained a bunch of all sorts of functionalities that have been expected by the owners of this console for quite some time.

However, some users could not get access to the desired firmware PS 4 6.51, since they faced an almost insurmountable obstacle – an error E-801809A8 on PS 4.

Problems with the release of the new firmware is a common thing for all owners of various electronics, but this problem is extremely alarming.

During the firmware upgrade to version 6.51, the E-801809A8 error may appear on the screen, after which your controller stops working.

Having connected the controller to the console via USB, you can click on the confirmation, after which the console restarts … and everything repeats.

From user surveys on the forum, it was found that the E-801809A8 error is manifested in most cases by users who either have no Blu-ray drive or are in

Non- working condition.

However, there is a rumour that the drive is not the root of the problem. The problem is extremely difficult,

But at the moment there are already several methods that may help you update the console and fix this unpleasant situation. Let’s take a look at them.

Update the console firmware with Safe Mode

That the usual method of the console cannot be fixed since the obstacle is negotiated failure.

However, some users contacted Sony support and they recommended updating the console using flash media through safe mode. you have to use this advice and try to upgrade the firmware to 5.01 in this way.

That’s right, not until version 6.51, but before 6.51, since Sony, after the incident with the long-awaited flash, happened, released another version of the firmware, which, in theory, should fix the E-801809A8 error.

  • First, you need to download firmware 6.51 click here to download, which takes you to the official Sony website.
  • As soon as you download the PUP file with the new firmware, you will need to connect to the computer a fully formatted flash drive, which has at least 1 gigabyte of free space.
  • Go to the flash drive and create a folder on it PS4.
  • Then go to the folder you just created and create a folder there as UPDATE.
  • Transfer the PS 4 UPDATE file. PUP to the UPDATE folder and the flash drive will be ready to perform the firmware upgrade to 5.01 of your PS 4.

Then flash drive from the computer needs to be removed only by SAFE REMOVAL. Yes, you are used to simply remove the flash drive from the computer alive, but this may damage some files on it. If you damage the firmware file on a flash drive, then you have every chance to make a pile of plastic and metal from your PS 4.

  • It’s time to get to update the PS 4 console, which we hope will help you overcome the E-801809A8 error.
  • Disconnect your PS 4 completely if it was turned on using the power button on the front of the case.
  • You will see the indicator blink and the console disconnects.
  • Insert the USB flash drive with firmware 6.51 into the front USB port.
  • Again press the Power button of the console and hold it down exactly until two beeps sound (the whole process will take about ten seconds).
  • Connect your controller to the console using a USB cable ( this is very important since wireless technologies do not work in Safe Mode) and press the PS button on it.
  • In the Safe Mode, select the “Update System Software” option, and then select the update option using the flash media.

Initialize PS4 system

  • Then let’s try to refer to the Initialization of the PS 4 system . E-801809A8 may have occurred due to some data on your hard disk or incorrect system software.
  • This process involves deleting absolutely all data from your console: system software and files from the hard disk. Yes, a terrible price for trying to correct the error E-801809A8, but considering that your PS 4 has the utility of a brick at the moment.
  • The process is quite simple and does not take much time: re-enter your PS 4 into safe mode. Then select “Initialize PS 4 System (Reinstall System Software)” and follow the on-screen instructions.

Everything is very simple and does not take much time.

As soon as you’re done with this far from the most pleasant process and start the console, you will be prompted to upgrade to the latest firmware version, which you can do with a previously created flash drive with this same firmware version 6.51.

Sony support

If this process is not working then contact Sony they will help you out from the problem..!

support.PlayStation

PlayStation® Support

Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

Fix CE 33986 9 Error Code

FIXED: CE 33986 9 Error Code Processed Below

PlayStation-PS4-Error-CE-33986-9-Here-is-the-fix

CE 33986 9 error code Even I was facing the same error last night, so I turn off PS4 remove all cables and clean everything I also used pressure air.

Plug everything back and working again.

PS4 error Ce 33986-9 error code is an error if you may not reach the PSN server. It can be the Playstation server is undergoing maintenance, if it will wait till the server is up however if your internet connection has a problem. There are lots to check for. Please see below for the guides.

Firstly, please usually shut down your PS4 and unplug it.

Then, shut down and unplug your router and modem for a minimum of thirty to one min.

After this, power on all device and check out to see if you’ll connect.

If you may not connect take a look at your internet speed by accessing speedtest.net using your laptop or your mobile phone.

If the output of the speed test net is equal or nearly equal to your subscription, your PS4 association has the problem. Otherwise, your ISP is that the cause, if it’s the ISP call them or attempt another day.

  • Try to connect through another network setup, if you’re using coax cable attempt using local area network or the other way around.
  • If both are having the error, connect on to the modem, then reset your modem to revive its default setting and take a look at once more.
  • However, if one in all the setups is running smoothly, please see below.
  • For local area network problem, hunt for a spot with a much better local area network signal.
  • For ethernet cable problem, replace the cable. You may also attempt using an alternative router or modem ports.

Configure PS4 Network Setting

  1. Go to Settings.
  2. Select Network Settings ==> Internet Connection Settings.
  3. WiFi: Under Use Wi-Fi, select Custom. Select your Wi-Fi network name.
  4. Wired: If it is a wired connection, select Custom for Operation mode.
  5. Select Automatic for IP Address Setting.
  6. Select Do Not Set for DHCP hostname.
  7. Select Automatic for DNS Setting.
  8. Select Automatic for MTU.
  9. Select Do Not Use for Proxy Server.
  10. Save your settings.
  11. Try to connect again.

Change DNS settings

  • Open the PS4 Menu-go to Settings-Network –Set Up Internet Connection
  • Select Wi-Fi or LAN cable depending on your Internet connection
  • Go to Custom-IP Address Settings- DHCP Host Name go to-DNS Settings (Manual)
  • Change the DNS settings and enter 8.8.8.8 as your primary DNS and 8.8.4.4 as your secondary DNS
  • Go to Next-MTU Settings (Automatic)-Proxy Server (Do Not Use)-test your Internet connection to see if the issue persists.

Try switching to alternative DNS servers often this error is caused by your ISP,s DNS servers restricting PSN access. Ideally, these should be entered in your router settings but can be entered in your PS4’s network settings, try either of the free to use DNS servers listed below.

Google

Primary 8.8.8.8

Secondary 8.8.4.4

OpenDNS

Primary 208.67.222.222

Secondary 208.67.220.220

Do Comment Down If you are still having any Problem or simply contact us, Share it to your friends If they are in need of the ps4 errors details!

Thanks For Your Valuable Time

Have a beautiful day..!

Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

Solved: NP-31950-8 Error Code In Few Seconds Only

Fixed : NP-31950-8 Error Code

NP-31950-8 error code have you got the NP-31950-8 problem “oh shit” even I was facing this problem now..! so, I thought I would like to share with you how I solved the problem ..!

fixps4error will tell all exact problem..! do visit our site when you get any problem on your ps4 error’s. I wish you will understand all the issues of the ps4..! if you want to say anything do comment down..1 I will answer your question..!

Here we go to solve NP-31950-8 error code

  • You get this problem even because of network connection time out during the PSN.
  • Internet connection test by going to [Settings] > [Network] > [Test Internet Connection] to confirm you can connect to the network.

And even if you are not able to connect, try by using resetting your local network connection, by powering off your ps4 and wait for 5 minutes and turn it on.

If even that helped you then update your ps4 firmware. And do contact your router manufacturer and internet service provider if you are required…! or do try later because the server may be having high traffic.

I was on a wired connection, but I got the NP-31950-8 error code after 5 – 25 minutes being online in-game. Even the PS4 Party connection would drop, so it was not related to the game itself.

In the end, I discovered that my new wired cable CAT5E should be supporting 1000MBIT, but it was only supporting 100MBIT. This was because it was wired wrong.

I changed the internet cable, saw that I am now on 1000MBIT and I have no more connection issues. then I checked the 1000MBIT support via the switch port lights AND via the router “connected devices.

Change your DNS:-

The console should have automatic DNS settings. Now we will try to set you these settings manually. And Google provides for public access fairly reliable DNS-servers, which we currently use.
change DNS on PS4

Here is super fast DNS for PS4

  • SettingsNetworkEstablish an Internet connectionUse a LAN / Wi-Fi cableSpecialAutomaticDo not specifyManually
  • Primary DNS: 8.8.8.8
  • Additional DNS: 8.8.4.
  • Complete the network connection setup
Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

Solved: CE-34788-0 PS4 Error Code

CE-34788-0 PS4 Error Code Error Has Been Solved Very Easily.

The CE-34788-0 error code on PS4 is a fairly common problem for owners of this console from Sony, what this error is and how to get rid of it. Immediately you need to say that the question itself is minor and is solved very quietly, so you do not have to spend a considerable amount of time on it. ce 34788 0

Get The Best DNS For Playstation 2019

We have listed one of the easiest way to Update your Playstation, You can do just by reading this article.

Make sure You have the fastest Internet DNS for your PlayStation, If not? Click here

Thus, the CE-34788-0 PS4 Error Code on the PS4 occurs when the user tries to update the firmware version using USB storage, on which the new firmware is downloaded, downloaded from the official Sony website.

The problem is the firmware version you are trying to use to upgrade your PS4.

The cause of the CE-34788-0 PS4 Error Code on PS4 is, and you will surely be surprised by it. You downloaded the wrong version of the firmware needed for the upgrade to USB storage. ce 34788 0

Error CE-34788-0 on PS4

Go back to the official Sony website, in the PS4 system software download section, and carefully,

Remember which link you used when downloading the PS4UPDATE.PUP file (firmware).The thing is that there are two specific firmware versions for each PS4 update case.

Only One version is used to update the PS4 with old firmware version installed on it. also, try this for your mobile GB WhatsApp Download.

The second version is used by those users who have introduced a new hard disk in PS4,and they need to install the PS4 system software fully. ce 34788 0

CE-34788-0 PS4 Error Code on PS4 could appear if you downloaded the wrong firmware version for yourself.

You are a user who wants to update his console on the original HDD,use the big blue button at the very top of the page.

If you’re going to install a new version of the firmware on the PS4 console with a replaced hard disk – use the firmware from

The new system software installation section located at the very bottom of the page this firmware will be approximately 900 megabytes. ce 34788 0.

If you still in the need of some help or your problem is still not solve you should submit your problem in detail – Submit Playstation Error.

Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

WS-37397-9 PS4 Error Code Chilled

Fixed: WS-37397-9 PS4 Error Code

WS-37397-9 PS4 Error Code The in famous WS-37397-9 error has been resolved for several months now. Once this error code is seen on the PS platform when using a store or network test. Check the PlayStation site

If your PS4 is not updated make sure it is, Up-to-date

  • The PSN is being checked
  • The PSN is blocked if the IP address is blocked due to PSN violation.

Can be seen from the service status information, and it is not necessarily the case that people complain. Sony says the virus-infected device may be blocked because it is on the home network (router).

Of course, this is an official opinion, but it is not real. The real reason is that Sony decides that specific IPs are DDOS zombies or anything threatening. And this is to block public IP itself, so in general, environment using a router; it causes the following symptoms.

  • WS-37397-9 error occurs when attempting network connection from PS series console
  • No device connected to the same line can access PSN web store or mobile app

Because it is an IP van, it is not surprising that other devices besides the game machine are also not available. In this case, the PC Web browser and the error message that the current site is not available. WS-37397-9 PS4 Error Code is solved very easily.

Or, if you try to log in once you are connected, the login fails and an error page appears.

Also, once a WS-37397-9 error code has occurred, changing the router MAC or reassigning the public IP will cause a temporary connection, but it is very likely to be blocked again shortly.

This means that the modem, router, and terminal of the line, not the IP address itself, may determine that the PSN is an unhealthy connection.

Note that the solution you can see on the PS4 is to turn the router or modem off and on, but this is not likely to be solved for this reason.WS-37397-9 PS4 Error Code

Sony does not explain precisely what this cause is, so speculation is only rampant, but there are several possibilities as it is judged to be an unhealthy connection.

  • When attempting to connect with PSN using VPN. It does not say that it will be blocked after a particular time even when IP or MAC is changed.
  • Any configuration of the router or modem (E.g., the DHCP update is too fast) is misidentified to match the characteristics of the attacker.
  • If the IP address is assigned unintentionally

WS-37397-9 PS4 Error Code, You have reassigned IPs 1 or 3; it will be resolved (you can not change your IP if it’s an account van, but the account van will not take it unless it’s a precise offense, not an overseas payment.

In most cases, the router is more likely to be the cause of the modem than the modem, but it is not easy to find a solution. There is no way to know which setting is the cause in the first place.

  • Note:- that some people say that the DHCP update cycle has been slowed down, but that was not the case.

IP van has been resolved, but a few minor issues remain. Not all devices are connected to the router, but the tools are connected directly to the modem and devices connected to the router. The main problem was the ability to interwork with each other. It’s like NAS or Google Cast

Google Cast

In order to solve,WS-37397-9 PS4 Error Code, Kindly follow these

  • The Internal connection of the NAS with the PC (the modem is directly connected through the switching hub). DDNS connection, but the performance is degraded. I could leave my PC on the router, but I turned to direct link to access the PSN website.
  • The PC is connected directly, and the home network function cannot be used at all. Network printer or ………..
  • Nvidia shield from PC to Google Cast is not available. The guard is left as a router connection for direct connection with the NAS.
  • I can not play NAS video on PS4. I did not write …
  • Mobile devices connected via WiFi still do not link to PSN. Although to the cellular,
  • Vita, so not only WiFi connection nodal

IP van problem itself does not happen with certain routers, so I do not think the router is the cause. Unless Sony has implemented such a loose cut-off for security reasons and does not disclose certain standards, it is only by overcoming the number of people who are caught. If the router is not replaced, the most severe prescription is a direct connection.

  1. Change the router settings (If the DHCP renewal cycle is active, etc.)
  2. Replace the router (Different manufacturers or chips or specs are significantly different)
  3. Direct connection (Multiple ports to the modem)
  4. Turn off your ps4 console by pressing the power button and release it after you hear two beeps, which will mean a complete shutdown of the PS4.
  5. Launch the console in Safe Mode by pressing the power button and holding it for seven seconds.
  6. Connect the DualShock 4 controller via USB and press the PS button on the controller.
    Scroll through the list with options and select “Database Reconstruction,” and then press X on the controller to start the operation.
  7. Once it is finished, your console will automatically reboot.
  8. Go through “Settings → Network → Check Internet connection” to run an Internet connection test.

Google public DNS

  • First, open “Settings → Network → Establish Internet Connection.”
  • Select Wi-Fi or LAN depending on how your PS4 is connected to your network.
  • Configure IP address: automatically DHCP.
  • Hostname: do not specify.
  • DNS settings: manual
  • Primary DNS: 8.8.8.8.
  • Additional DNS: 8.8.4.4
  • MTU Settings: Automatically
  • Proxy server: do not use
Find the Superfast free DNS Here

Changing Your IP Address

  • Change your router or modem.
  • Contact your ISP to change the IP address.
  • If you provide dynamic IPs, then wait a couple of days and try to reconnect.

Congrats your WS-37397-9 PS4 Error Code is fixed now.

Categories
PS4 DNS ERROR SOLVED Ps4 Error Solved

Solved: PS4 DNS Failure NW-31250-1

DNS Failure NW-31250-1 PS4 Error Code Fix PS4 can occur during any interaction with the PlayStation Network service. You can see this code during the activation of games for the console.

When you try to access the network functions of a particular game, Make sure your ps4 is update, if it is not then please do it here

Ps4 Update Download

Update to superfast DNS of your ps4

What the problem in NW-31250-1

Such a problem could arise from the fault of the DNS server. The NW-31250-1 error can occur for entirely different reasons. A crashing router could cause a problem, some glitches in the PS4 console firmware, and you shouldn’t dismiss the option that the PlayStation Network services are currently under maintenance or are disabled and are being restored.

How to solve NW-31250-1

Restart your Wi-Fi:- The error NW-31250-1 appears as a result of the incorrect operation of the Wi-Fi router. If your console is connected to the network in this way, then know that the router is a possible suspect. You need to try restarting it, and then try again to use the PSN features on your console. Unplug the power cable from the router and press the special power button, wait about 20-30 seconds and connect the power to the router.

Update PS4

NW-31250-1 error on PS4 was caused by a flaw in the firmware on your console. I request you try updating the PS4 software, and then check to see if this has resolved the NW-31250-1 error.

  • Open the “Settings” of your PS4
  • Go to the “System Software Update.”

Despite the inability to use the PSN services, access to the Internet on your console should remain. As soon as you click on the above section, the console will check for new firmware, and then automatically install the latest version.

Change your DNS:-

The console should have automatic DNS settings. Now we will try to set you these settings manually. AndGoogle provides for public access fairly reliable DNS-servers, which we currently use.
change DNS on PS4

Here is super fast DNS for PS4

  • SettingsNetworkEstablish an Internet connectionUse a LAN / WiFi cableSpecialAutomaticDo not specifyManually
  • Primary DNS: 8.8.8.8
  • Additional DNS: 8.8.4.
  • Complete the network connection setup

I really apologies for the Images*(Not so clear),

If you problem NW-31250-1 PS4 Error Code is Not Fixed or still not solved, Then